Alright, Arlington Heights homeowners, let us talk about Closed-Cell Spray Foam. It is a very good insulation product. This is especially true with our Midwest weather here in Arlington Heights. But like any good investment, you have to know when to put Closed-Cell Spray Foam in and how to look after it. Allied Insulation has seen many homes in Arlington Heights, from the older homes in Scarsdale to the newer homes near Lake Arlington. Understanding our local climate in Arlington Heights is key to getting the most out of your Spray Foam.
When is the Best Time to Schedule Closed-Cell Spray Foam in Arlington Heights?
You might think any time is a good time for Insulation. But with Closed-Cell Spray Foam, the timing does matter. Our climate here in Arlington Heights gives us a lot of different weather. This includes freezing winters and hot, humid summers.
- Spring and Fall are Prime for Closed-Cell Spray Foam: These are the best times for Closed-Cell Spray Foam application in Arlington Heights. The ambient air and the surface temperatures are usually in the ideal application range for Spray Foam. This range is typically between 41°F and 86°F. We usually have mild temperatures in Arlington Heights during these seasons. There is also lower humidity and drier surfaces. This helps the Spray Foam adhere properly and cure just right. Think about May, June, September, and early October for your Closed-Cell Spray Foam project.
- Summer is Doable for Closed-Cell Spray Foam, with Some Things to Consider: Our summers in Arlington Heights get warm, and sometimes hot. The average high temperature in July is 84°F. Humidity can also be a factor, especially in July. Closed-Cell Spray Foam can handle a wider range of temperatures. However, extreme heat can affect how the Spray Foam expands and cures. If Allied Insulation is spraying in summer, we are extra mindful of ventilation. We also keep the materials at the right temperature for the Closed-Cell Spray Foam application.
- Winter for Closed-Cell Spray Foam? It is Tricky: January is our coldest month in Arlington Heights. The average low temperatures are around 17-18°F. Applying Spray Foam when it is too cold can make the foam brittle. This can lead to cracks or uneven expansion of the Closed-Cell Spray Foam. It is not impossible to apply Closed-Cell Spray Foam in winter. But it requires more prep work. This includes heating the job site and warming the foam materials. This is to make sure of proper application and curing. It is more complicated. It can sometimes affect the final quality of the Closed-Cell Spray Foam if it is not done perfectly.
Weather Conditions That Affect the Closed-Cell Spray Foam Work in Arlington Heights
It is not just the season for Closed-Cell Spray Foam application. It is also the specific conditions on the day of application. Here is what Allied Insulation, as your Insulation pros in Arlington Heights, is always looking at:
- Temperature for Closed-Cell Spray Foam: We have already talked about this. But it is important for Closed-Cell Spray Foam. The ideal temperature for the foam components and the environment is typically 70°F to 85°F. The surface we are spraying onto needs to be at least 50°F for Closed-Cell Spray Foam. If it is too cold, the foam will not cure right. If it is too hot, the foam can expand too quickly or shorten the bond time for the Closed-Cell Spray Foam.
- Humidity for Closed-Cell Spray Foam: Arlington Heights can get very humid, especially in the summer. Closed-Cell Spray Foam is moisture-resistant once it is cured. However, high humidity during application can make the curing faster. Or in some cases, it can cause over-expansion and shrinkage of the Closed-Cell Spray Foam. Allied Insulation aims for relative humidity between 40% and 70% during the application of Closed-Cell Spray Foam in Arlington Heights.
- Surface Condition for Closed-Cell Spray Foam: This is a very important part of Closed-Cell Spray Foam application. Any surface Allied Insulation sprays needs to be clean, dry, and free of dust, frost, or grease. If there is moisture on the substrate, it can really affect the foam's physical characteristics and adhesion. This is important for a good Closed-Cell Spray Foam job in Arlington Heights.
- Wind for Closed-Cell Spray Foam: Wind is not as important for indoor applications of Closed-Cell Spray Foam. But strong winds can affect outdoor projects or areas with open access. This can lead to overspray. Allied Insulation always takes precautions to protect surrounding areas when applying Closed-Cell Spray Foam in Arlington Heights.
Protecting Your Closed-Cell Spray Foam Investment Year-Round in Arlington Heights
Once Closed-Cell Spray Foam is installed, it is very durable and long-lasting. It does not settle or degrade like some other Insulation types. Closed-Cell Spray Foam often lasts the lifetime of your home in Arlington Heights. But a little care goes a long way for your Closed-Cell Spray Foam.
- Ventilation is Still Important for Closed-Cell Spray Foam: Even with excellent Closed-Cell Spray Foam Insulation, proper ventilation in your attic and crawl spaces helps manage moisture and air quality. This is especially true in older Arlington Heights homes that might have had moisture issues before the Closed-Cell Spray Foam was installed.
- Mind Your Moisture with Closed-Cell Spray Foam: Closed-Cell Spray Foam acts as a vapor retarder. This is good for preventing moisture infiltration. It also reduces the risk of mold. However, if you have a dirt crawl space, for example, you still need a proper vapor barrier on the ground. This prevents moisture from evaporating into the space and causing issues, even with Closed-Cell Spray Foam.
- Regular Home Maintenance for Closed-Cell Spray Foam: Keep up with your usual home maintenance in Arlington Heights. Check for roof leaks, plumbing issues, or cracks in your foundation. Closed-Cell Spray Foam is tough. But addressing these problems quickly protects your entire home, including your Insulation.
- Do Not Disturb Your Closed-Cell Spray Foam: Once the foam is in place, try not to disturb it. If you need to do renovations or repairs in an area with Spray Foam, consult with a professional. This makes sure you do not compromise its integrity. Allied Insulation can help with this in Arlington Heights.
- Enjoy the Savings from Closed-Cell Spray Foam: Remember why you invested in Closed-Cell Spray Foam! You will likely see 15% or more savings on heating and cooling costs in Arlington Heights. That is money in your pocket, year after year. This is thanks to a more efficient, comfortable home with Closed-Cell Spray Foam.
Closed-Cell Spray Foam is a smart choice for keeping your Arlington Heights home comfortable and energy-efficient. Just make sure you are thinking about the seasons and those weather conditions when you plan your project. Then give it the minimal care it needs to keep performing for decades. Allied Insulation provides Closed-Cell Spray Foam services to homes in Arlington Heights, IL.